Compact locator CL43-PA

CL43 Compact Locator is an affordable and easy-to-use wire and cable and duct sonde locator. Outdoors CL43 can be used to trace and pinpoint underground cables and sondes in several metres depth. Indoors CL43 can be used to locate for example floor heating cables and wires inside walls.

CL43 has a simple user interface with only two buttons, 13 LED lights and a waterproof speaker. Probes are easy to disconnect making it easy to carry the receiver and a probe even in a pocket.

CL43-PA kit does not include a transmitter but it is compatible with Vesala 33kHz transmitters (CTT33 and SG33) and duct sondes (See Duct Sondes category). CL43 also works with other manufacturers’ 33kHz transmitters.

Especially for tracing cast iron ducts a product setup CL43-PB is available. Corresponding 512Hz sondes are PL18-05 and PL42-05.

Additional probes for CL43 can be acquired also later. If you would need a setup to trace cables and wires indoors and outdoors, look at the CT33 cable tracer. We will build a setup according to your preference including probes and duct sondes, all packed in a handy case.

Technical data:
33kHz – 512 HZ
32cm (incl. probe)
0,3 kg
Environmental conditions:
-10°C – +40°C
Green LED for power on and low battery indication, 12 red LEDs for received signal strength display (24 levels), for firmware version display, for battery status display and for active operating frequency display
Sound indicators:
Internal speaker for tracing signal and for other audible indications
3pcs. 1.5V IEC LR03 (AAA) alkaline batteries.
3,6…6,5 V
Enclosure material & size
Stainless steel, aluminium an polyamide, 180 x Ø46 mm, weight approx. 230g (without probes)
IP / IK-code
IEC 60529: IP44

Ask us for an offer

Ask us for an offer on this product via the contact form